Devices
Device app installation
Philips

Philips device

Prerequisites

Compatible device:

TVs - model lines D, Q, P

Tablets - Philips 10BDL3051T, Philips 24BDL3051T, Philips 10BDL4151T, Philips 24BDL4151T

USB flash drive with core application .apk file download here (opens in a new tab).

Installation steps

  1. Turn on the display
  2. Download SignageLAB latest Android app to USB flash drive
  3. Insert flash drive with our app into Philips’ USB port, make sure to use the correct USB port, otherwise there might be permission issues.
  4. Press HOME and 1888 on the remote control
  5. Select Apps

image

  1. Select File Manager

image

  1. Navigate to /mnt/usb/

image

  1. Select signageOS App
  2. Select Install

image

  1. Return to home screen

Model specific settings

10" Touch 10BDL

  • Go to Apps section
  • Select Signage Apps
  • Check signageOS App as primary Signage App
  • Restart the display

10" Touch 10BDL415T

  • During initial startup of the device you will be prompted with option of features to enable
  • Make sure that SICP option is enabled (under Security Setting)
  • Proceed with provisioning like any other Philips device

For any other Philips display

  • Go to Signage Display section and Boot section
  • Select Custom App
  • Check signageOS App is set as custom app, if not, select it
  • Restart the display

Mandatory SICP settings

To make sure your Philips display will support all device management features, you have to enable SICP over LAN settings.

Android 4.4-6.0:

  • Go to Settings > Signage Display > SICP Network Port

Android 7.x:

  • Go to Settings > Signage Display > Network application > SICP network port

Make sure that Main Switch is set to Enabled and SICP Network Port reads 5000 (Connected). Adjust both settings accordingly.

BenQAndroid